This product family supports FireWire

Outside of
North America?


micro-line UC1394a Carrier Board

The micro-line UC1394a carrier board provides a powerful and flexible board-level environment within which ultra-compact multi-chip modules can be evaluated and utilized. It allows an ultra-compact multi-chip module to be used as a stand-alone system, as a daughter card component within a micro-line embedded DSP system, as well as a target-programmable resource for JTAG-based DSP and FPGA software development tools.

The carrier board provides external connectors for accessing the many digital, analog, communications, and other I/O interfaces provided by ultra-compact multi-chip modules. The carrier board also provides its own user-programmable FPGA for adding user specified logic, as well as a means to combine many of the I/O services in preferred application specific configurations.

System Configurations

Designed as a micro-line compatible board, the UC1394a carrier allows ultra-compact multi-chip modules to operate in a variety of system configurations:

Stand-Alone Carrier Board
Powering the carrier board from a micro-line PowerSupply board allows the ultra-compact module to be used as a stand-alone resource. Various user accessible I/O lines are directly connected to various micro-line connector pins.

micro-line Plug & Play Peripheral
The carrier board FPGA and ultra-compact module can be configured so that the ultra-compact multi-chip module appears as a plug and play peripheral when added to an existing micro-line DSP system. This allows, for example, direct C6000 McBSP to IEEE 1394, USB or fast parallel bus DMA transfer from the main processor to the UC1394a-x streaming interface.

micro-line TMS320C55xx Bus Master
The carrier board FPGA and ultra-compact module can be configured to extend the ultra-compact TMS320C55xx DSPs address and databus signals across the micro-line bus interface. This would allowing various additional peripheral micro-line boards, like A to D or D to A converters, to be directly managed by the ultra-compact´s own DSP.

The micro-line pins at the ultra-compact UC1394a-x Carrier board typically operate at 3.3V signal levels and are not 5V tolerant.

View UC1394a Carrier Board Datasheet

     

 

Search | Home | Site Map | News | Sales | Technical Support | Contact Info | DSP | Imaging | FPGA | FireWire | Ethernet

Traquair reserves the right to change specifications without notice.
Copyright © 2005 All Rights Reserved. All trademarks acknowledged. Report problems to the webmaster.
This site is optimized for viewing with Internet Explorer 6.0+ and Netscape 7.0+