eXpressDSP Compliant

bf3Net
is Compliant with eXpressDSP and the
TI Algorithm Standard

Outside of
North America ?

Windmill Innovations


bf3Net F2812 Networking Kit

Product Highlights
  • bf3Net TCP/IP Protocol Stack
  • 100BaseTx Ethernet communications interface
  • UART communications port
    (RS-232 level)
  • Expansion connectors for TMS320F2812 peripherals
  • Graphical configuration and integration tool
  • Includes driver software and reference design

bf3Net F2812 Networking Kit: Internet Connectivity for the TMS320C2800 DSP

The bf3Net F2812 Networking Kit offers the most advanced solution for TMS320C2800 Internet-connectivity at an affordable price.

Based on the bf3Net TCP/IP Protocol Stack, the bf3Net F2812 Networking Kit contains everything (1) you need to start your C2800-based Internet-enabled DSP application in the shortest time possible.

  • Texas Instruments TMS320F2812 DSP Controller
  • 100BaseTx Ethernet full-duplex communications interface
  • UART communication port (RS-232 level)
  • External 10ns 256kx16 external SRAM
  • Expansion connectors for F2812 peripherals (EVA, EVB, ADC, McBSP, SPI, CAN)
  • 8 user-defineable switches
  • 8 user-defineable LED visual indicators
  • Communication status LEDs
  • RJ-45 (Ethernet) and 9-pin SUB-D (UART) media connectors
  • JTAG emulation header
  • Configuration DIP switches
  • bf3Net TCP/IP Protocol Stack (Starter Kit version)
  • bf3Net F2812 Networking Kit device driver library
  • F2812 Chip Support Library
  • Reference application software
  • Delivered with technical documentation and reference design (PDF)

The bf3Net 2812 Networking Kit contains: bf3Net 2812 Networking Kit target board, bf3Net TCP/IP Protocol Stack (limited to three sockets and the target hardware), bf3Net Integration Tool (full version), bf3Net Run-Time Monitor (full version), reference applications, technical documentation (PDF), communication cables, power supply, 90 days of technical support (by e-mail).

bf3Net F2812 Networking Kit Documentation

The following documents are available for the bf3Net TCP/IP Protocol Stack:

Document Date Size
bf3Net F2812 Networking Kit product bulletin (pdf) July 7th, 2004 229kBytes
bf3Net F2812 Networking Kit user manual (pdf) July 7th, 2004 144kBytes

Please contact us if you require more information.

(1) C2000 Code Composer Studio and JTAG In-Circuit Emulator are required to use the F2812 Networking Kit, and are optionally available from Traquair.
     

 

Search | Home | Site Map | News | Sales | Technical Support | Contact Info | DSP | Imaging | FPGA | FireWire | Ethernet

Traquair reserves the right to change specifications without notice.
Copyright © 2005 All Rights Reserved. All trademarks acknowledged. Report problems to the webmaster.
This site is optimized for viewing with Internet Explorer 6.0+ and Netscape 7.0+