eXpressDSP Compliant

bf3Net
is Compliant with eXpressDSP and the
TI Algorithm Standard

Outside of
North America ?

Windmill Innovations


100BaseTx Ethernet

Product Highlights
  • 100 Mbit/s full-duplex Ethernet communication
  • Based on SMSC LAN91C111 Ethernet controller
  • 8 kByte on-board FIFO packet
    buffer memory
  • Includes tested driver software

100BaseTx Ethernet DSK Daughter Card

The 100BaseTx Ethernet daughter card provides 100 Mbit/s, full-duplex Ethernet communication for DSP Starter Kits. It offers the following features:

  • MAC/PHY Ethernet controller
  • 8 kByte on-board FIFO packet buffer memory
  • Communication status LEDs
  • Configuration DIP switches
  • RJ-45 media connector
  • Compatible with Windmill Innovations bf3Net TCP/IP Protocol Stack
  • Delivered with technical documentation (PDF), tested driver software (source code), schematics (PDF), Cat. 5 UTP cable.

The architecture of the 100BaseTx Ethernet daughter card is based on the LAN91C111 MAC/PHY Ethernet Controller from Standard Microsystems Corporation. Please refer to the datasheet for further details.

100BaseTx Ethernet DSK daughtercard - supported target hardware

Processor / Platform Supported Target Boards
Texas Instruments TMS320C5000 C5416 DSK, C5510 DSK
Texas Instruments TMS320C6000 C6414 DSK, C6713 DSK

Important notice: the 100BaseTx Ethernet daughtercard is only available as part of the bf3Net TCP/IP Starter Kit or for licensed users of the bf3Net TCP/IP Protocol Stack.

Please also check our cross-platform product availability overview for a complete list of our products and supported processors.

 
     

 

Search | Home | Site Map | News | Sales | Technical Support | Contact Info | DSP | Imaging | FPGA | FireWire | Ethernet

Traquair reserves the right to change specifications without notice.
Copyright © 2005 All Rights Reserved. All trademarks acknowledged. Report problems to the webmaster.
This site is optimized for viewing with Internet Explorer 6.0+ and Netscape 7.0+