- High grade connectors
- DSub 9 female connector, DSub 9 male connector
- Complies with CiA (DS 1021)
CAN cables with connectors complying with CiA Physical Layer (DS 1021) serve to connect CAN nodes and include each a male and a female connector of type DSub 9. We only use high quality connectors with gold plated contacts and a minimum mating durability of 200 cycles. CAN cables are available in different length from 20cm to 2m.
Technical Data
The following table shows the assignment of the CAN connectors:
Pin | Name | Function |
2 | CAN_L | CAN Data line (dominant low) |
3 | GND | Ground |
6 | GND | Ground |
7 | CAN_H | CAN Data line (dominant high) |
8 | ERROR | Error signal (optional) |
9 | Vcc | Power supply |
Nominal Values
Parameter | Maximum | Unit |
Core diameter pin 2, pin 6, pin 7, pin 8 | 0.2 | mm² |
Core diameter pin 3, pin 9 | 0.4 | mm² |
Current rating pin 2, pin 6, pin 7, pin 8 | 2 | A |
Current rating pin 3 and pin 9 | 4 | A |
Operating voltage | 300 | V |
All values, unless otherwise specified, refer to an environmental temperature of maximal 30°C.